TBK Manual in HTML Format

The TBK user manual is available here in HTML format. This online documentation provides a clear structure, easy navigation between chapters, and direct access to all relevant information for using TBK.

0 - Table of Contents
1 - A Helpful Guideline to the Manual
2 - General Functions
3 - Shafts with Strength According to DIN 743
4 - Rolling Bearings According to DIN ISO 281
5 - Single External and Internal Cylindrical Gear According to DIN 3960, and Other Standards
6 - Rack/Pinion Pairings According to DIN 3990, ISO 6336, and Other Standards
7 - Cylindrical Gears According to DIN 3990, ISO 6336, and Other Standards
8 - Planetary Gear Trains According to DIN 3990, ISO 6336, and Other Standards
9 - Three- and Four-Gear Train Systems According to DIN 3990, ISO 6336, and Other Standards
10 - Straight and Helical Bevel Gears According to ISO 23509 and DIN 3971
11 - Spiral Bevel Gears According to Klingelnberg KN 3028 and ISO 23509
12 - Cylindrical Worms with Globoid Worm Wheel
13 - Bolted Joints According to VDI 2230
14 - Interference Fits According to DIN 7190
15 - Parallel Keys According DIN 6892
16 - Involute Splines According to DIN 5480, and Other Standards
17 - Serrated Shaft and Splined Shaft Connection According to Niemann
18 - Bolts and Pins
19 - Clamp Connections
20 - Hirth Coupling
21 - Compression Springs According to DIN EN 13906-1-2002
22 - Tension Springs According to DIN EN 13906-2-2002
23 - Timing Belt Drives
24 - Tolerance Fit Calculator DIN ISO 286, Edition 1990
25 - Approximate Shaft Dimensioning According to Niemann 2001
26 - Rough Estimation of Bolted Joints According to VDI 2230 Sheet 1 (2003-02)
27 - Hardness Conversion According to DIN 50150: 2000-10